工作职责:
2.0JOB SUMMARY
Take full responsibility of Software development fautomobile controllers, including technical development trend, requirements analysis customer software development system test, etc.
3.0KEY RESPONSIBILITIES
Responsible fsoftware requirement analysis software architecture design
Responsible fthe software development of automotive thermal management controller, OBW (On-board weight) controller, cleaning system controller valve actuator.
Responsible fthe software development of BSW/RTE/ASW.
Responsible fcodes analysis codes test SIL test.
Responsible fsoftware technical problem solving.
Participate in the construction of software development related processes, tool chains databases, coordinate internally externally.
Cooperate to complete system-level testing.
2.0 工作总结
全面负责汽车控制器的软件开发,包括技术发展趋势、客户需求分析、软件开发和系统测试等。
3.0 主要职责
负责软件需求分析和软件架构设计
负责汽车热管理控制器、OBW控制器、清洗系统控制器和阀门执行器的软件开发。
负责BSW/RTE/ASW的软件开发。
负责代码分析及代码测试和SIL测试。
负责软件技术问题的解决。
参与软件开发相关流程、工具链和数据库的建设,内外部协调。
配合完成系统级测试。
任职资格:
4.0REQUIRED EDUCATION, EXPERIENCE, KNOWLEDGE AND SKILLS
Education: Bachelor’s degree above, more than 5 years working experience as automobile software development engineer.
Major: Vehicle Engineering, Electronic Science Technology, Electronic Information Engineering, computer, software, communication related majors.
Know well about C&C programming language.
Skilled use of mainstream automotive MCU, like TI, NXP, ST, etc.
Know well about vehicle network communication related standards like LIN/CAN/CANFD/FlexRay/ETHERNET&LIN2.2/ISO11898/J1939/100BASE-T1, etc.
Know well experience in motcontrol, BLDC&BDC, 6-steps inverting&FOC.
Experience in signal filtering algorithm.
Experience in calibration development based on XCP/CCP.
Experience in diagnosis development based on UDS, know well about ISO15765 ISO14229 DoIP.
Experience in function safety development, familiar with ISO26262 ASPICE.
Experience in OTA development related standards.
Familiar with Autosaur standard, proficient in a tool chain like VectETAS
Familiar with MATLAB/Simulink.
Personality: responsible, enterprising, hard-working, strong sense of teamwork, pressure tolerance
4.0 所需的教育、经验、知识和技能
学历:本科及以上学历,5年以上汽车软件开发工程师工作经验。
专业:车辆工程、电子科学与技术、电子信息工程、计算机、软件、通信及相关专业。
熟悉 C&C 编程语言。
熟练使用主流汽车MCU,如TI、NXP、ST等。
熟悉车联网通信及相关标准,如LIN/CAN/CANFD/FlexRay/ETHERNET&LIN2.2/ISO11898/J1939/100BASE-T1等。
熟悉电机控制、BLDC&BDC、6步反相&FOC方面的经验。
有信号滤波算法经验。
具有基于XCP/CCP的标定开发经验。
有基于UDS的诊断开发经验,熟悉ISO15765 ISO14229和DoIP。
有功能安全开发经验,熟悉ISO26262和ASPICE。
有OTA开发及相关标准经验。
熟悉Autosaur标准,精通Vector或ETAS等工具链
熟悉MATLAB/Simulink。
性格:有责任心、进取心、吃苦耐劳、团队合作意识强、抗压能力强
工作职责:
2.0JOB SUMMARY
Take full responsibility of Software development fautomobile controllers, including technical development trend, requirements analysis customer software development system test, etc.
3.0KEY RESPONSIBILITIES
Responsible fsoftware requirement analysis software architecture design
Responsible fthe software development of automotive thermal management controller, OBW (On-board weight) controller, cleaning system controller valve actuator.
Responsible fthe software development of BSW/RTE/ASW.
Responsible fcodes analysis codes test SIL test.
Responsible fsoftware technical problem solving.
Participate in the construction of software development related processes, tool chains databases, coordinate internally externally.
Cooperate to complete system-level testing.
2.0 工作总结
全面负责汽车控制器的软件开发,包括技术发展趋势、客户需求分析、软件开发和系统测试等。
3.0 主要职责
负责软件需求分析和软件架构设计
负责汽车热管理控制器、OBW控制器、清洗系统控制器和阀门执行器的软件开发。
负责BSW/RTE/ASW的软件开发。
负责代码分析及代码测试和SIL测试。
负责软件技术问题的解决。
参与软件开发相关流程、工具链和数据库的建设,内外部协调。
配合完成系统级测试。
任职资格:
4.0REQUIRED EDUCATION, EXPERIENCE, KNOWLEDGE AND SKILLS
Education: Bachelor’s degree above, more than 5 years working experience as automobile software development engineer.
Major: Vehicle Engineering, Electronic Science Technology, Electronic Information Engineering, computer, software, communication related majors.
Know well about C&C programming language.
Skilled use of mainstream automotive MCU, like TI, NXP, ST, etc.
Know well about vehicle network communication related standards like LIN/CAN/CANFD/FlexRay/ETHERNET&LIN2.2/ISO11898/J1939/100BASE-T1, etc.
Know well experience in motcontrol, BLDC&BDC, 6-steps inverting&FOC.
Experience in signal filtering algorithm.
Experience in calibration development based on XCP/CCP.
Experience in diagnosis development based on UDS, know well about ISO15765 ISO14229 DoIP.
Experience in function safety development, familiar with ISO26262 ASPICE.
Experience in OTA development related standards.
Familiar with Autosaur standard, proficient in a tool chain like VectETAS
Familiar with MATLAB/Simulink.
Personality: responsible, enterprising, hard-working, strong sense of teamwork, pressure tolerance
4.0 所需的教育、经验、知识和技能
学历:本科及以上学历,5年以上汽车软件开发工程师工作经验。
专业:车辆工程、电子科学与技术、电子信息工程、计算机、软件、通信及相关专业。
熟悉 C&C 编程语言。
熟练使用主流汽车MCU,如TI、NXP、ST等。
熟悉车联网通信及相关标准,如LIN/CAN/CANFD/FlexRay/ETHERNET&LIN2.2/ISO11898/J1939/100BASE-T1等。
熟悉电机控制、BLDC&BDC、6步反相&FOC方面的经验。
有信号滤波算法经验。
具有基于XCP/CCP的标定开发经验。
有基于UDS的诊断开发经验,熟悉ISO15765 ISO14229和DoIP。
有功能安全开发经验,熟悉ISO26262和ASPICE。
有OTA开发及相关标准经验。
熟悉Autosaur标准,精通Vector或ETAS等工具链
熟悉MATLAB/Simulink。
性格:有责任心、进取心、吃苦耐劳、团队合作意识强、抗压能力强
在求职过程中如果遇到扣押证件、收取押金、提供担保、强迫入股集资、解冻资金、诈骗传销、求职歧视、黑中介、人身攻击、恶意骚扰、恶意营销、虚假宣传或其他违法违规行为。请及时保留证据,立即向平台举报投诉,必要时可以报警、起诉,维护自己的合法权益。